Gill Instruments – WindObserver 90 – Vindmåler, NMEA ultralyd i rustfritt stål med kraftig oppvarming IP66, WO90
Modell: WindObserver 90
Produsent: Gill Instruments
WindObserver 90
- Måleområde 0 – 90 m/s og 0 – 359°
- Testet i.h.h.t. MILSTD810F Method 521.2 Procedure I
- Utgang: RS422
- Sporbar kalibrering i henhold til NAMAS standard
- 7A @24VAC eller DC (1W/cm2)
Følgende varianter er mulige:
Features
- Precision Ultrasonic Anemometer
- FAA & CAA Accepted for airport applications, (when supplied as part of a suitable Automatic weather observing system).
- Wind Speed Ranges 0-70m/s (0-156mph)
- 0-359° Wind Direction
- Optional De-icing System
- IP66 Rated Stainless Steel Construction
- Calibration to NAMAS Standards
- Connector or cable exit options
- Optional customer base mounts
- Free Windview Software
Wind Speed Specifications
| Range: | 0 – 90 m/s (0-201mph) |
| Starting Threshold: | 0.01m/s |
| Accuracy: | ±2% @ 12m/s |
| Resolution: | 0.01m/s |
Wind Direction Specifications
| Range: | 0-359° (no dead band) |
| Accuracy: | ±2° @ 12m/s |
| Resolution: | 1° |
Measurement
| Ultrasonic Output Rate: | 1-4Hz |
| Parameters: | UV, Polar, NMEA |
| Units: | m/s, knots, mph, kph, ft/min |
| Averaging: | Flexible, 1-3600 seconds |
Digital Output
| Communication: | RS422/RS485 full duplex/half duplex |
| Baud Rates: | 1200, 2400, 4800, 9600, 19200, 38400. |
| Formats: | 8 bit data; odd, even or no parity |
| Anemometer Statue: | Supplied as part of standard message |
Power Requirement
| Anemometer Only: | 9-30vDC (Max 60mA @ 12vDC) |
| Heating (Optional): | Max 7A @ 24vAC or DC |
Mechanical
| External Construction: | 316 Stainless Steel |
| Size: | 381 x 213mm |
| Weight: | 1.3Kg (excluding base & cable) |
Under kan du finne nyttige dokumenter for produktet:
