Gill Instruments – IS WindObserver – Vindmåler, NMEA ultralyd i rustfritt stål, EX ATEX IECEx IP66
Modell: IS WindObserver
Produsent: Gill Instruments
Sensoren består av vindsensor og en PCI. Sensoren monteres i Ex området, mens PCI monteres i sikkert område. PCI inneholder powersupply for sensor, galvaniske skiller og RS-422 NMEA interface.
1360 I.S WindObserver anemometer
- IECEx SIR 13.0157
- SIRA 00ATEX2218
- II 1 GD
- Ex ia IIC T4 Ga
- Ex iaD IIIC T135C Da IP66
- (Ta = -30C to 70C)
1360 I.S WindObserver PCI
- IECEx SIR 13.0156
- SIRA 00ATEX2217
- II (1) GD
- [Ex ia Ga] IIC
- (Ex iaD Da) IIIC
- (Ta = -30C to 40C)
Features
- 2 Axis Precision Ultrasonic Anemometer
- 0-75m/s (0-168mph) Wind Speed
- 0-359° Wind Direction
- ATEX and IECEx Approved for use in Hazardous Area
- Robust Stainless Steel Construction
- No on shore maintenance required
- Free Windview Software
Wind Speed Specifications
| Range: | 0-75m/s (0-168mph) |
| Starting Threshold: | 0.01m/s |
| Accuracy: | ±2% @ 12m/s |
| Resolution: | 0.01m/s |
Wind Direction Specifications
| Range: | 0-359° (no dead band) |
| Accuracy: | ±2° @ 12m/s |
| Resolution: | 1° |
Measurement
| Ultrasonic Output Rate: | 1Hz |
| Parameters: | Wind Speed & Direction |
| Units: | m/s, knots, mph, kph, ft/min |
| Averaging: | 3, 5, 10 or 15 seconds |
Digital Output
| Communication: | RS422/RS232 for power supply and interface RS422 from anemometer |
| Baud Rates: | 1200, 2400, 4800, 9600, 19200, 38400. |
| Formats: | 8 bit data; odd, even or no parity |
| Anemometer Statue: | Supplied as part of standard message |
Power Requirement
| PCI:
|
1) 100-120 VAC, 10VA 2) 200-250 VAC, 10VA |
Mechanical
| External Construction: | 316 Stainless Steel |
| Size: | 380 x 210mm |
| Weight: | 1.6Kg |
Under kan du finne nyttige dokumenter for produktet:
